Does your pool cage have moldy frames, rusty fasteners, damaged screens, or has become an eyesore? If yes, then you might want to get it restored, just like this enclosure in Fort Myers.
Here is what Ms. King’s old pool cage looked like. To make it look brand new again, she availed of the Lifetime Restoration project, so we re-screened, repainted using High solids Polyurethane 2 part epoxy far better than any factory, and replaced the fasteners of the entire enclosure with lifetime warranty stainless steel tapcons with finish.
Before we got started, we first covered the pool and deck area with plastic to prevent getting debris or paint drops on them. Next, all old screen mesh is stripped from the enclosure and disposed of. To ensure longevity, and structural integrity of your enclosure, we upgraded all of the old and rusted fasteners Blue-tap Nylotech and Stainless Pro-Tect Tapcons.
Next, we thoroughly cleaned and intricately prepped the structure for painting. We meticulously applied new paint for a lasting finish and to avoid overspray. We used bronze Sherwin Williams Hi-Solids Polyurethane, which was sprayed on electrostatically to withstand the harsh Florida sun and other elements. Lastly, we re-screened the entire structure using Superscreen. This mesh is three times stronger than the standard screen and can withstand strong wind pressure for a long time.
After our restoration process, it now looks brand new again. It took us one week to complete this project. Our client won’t have to look at rusty fasteners, moldy frames, or an eyesore-looking pool cage anymore.
Ref. No. 21120